* Very low noise direct current output
* High output power for rapid heating
* Compatible with our range of heating devices
* Temperature control below ambient with optional Peltier Controller (PC01)
The PTC03 is a temperature control unit for use in conjunction with our brain slice chambers, perfusion solution heaters and an increasing range of other systems currently under development . The required temperature is set using the front control panel. Provision is also made to display the temperature from a monitor sensor if this is being used. At a setting of 40°, with an ambient of 20°C, full control is reached within 10 minutes when used with our submerged and interface mode slice chambers. The set temperature must exceed ambient by at least 2°C.
D.C. proportional control
110/240V +/- 10% 60/50Hz, 50 W
0.5°C below set temp. max. diff.
Pt 100 platinum resistance grade B.
Dimensions / Weight:
120H x 200W x 280D / 4 Kg
Max +/- 0.1°C from control point.
10 to 60°C
36 Watts max.
For full web page, please see http://www.autom8.com/brain-slice-ptc03.html
Download a brochure at http://www.autom8.com/pdf/AM-PTC03.pdf