Please order tubing separately.
A full-featured, miniature peristaltic pump designed specifically for low flow laboratory applications. Our wide variety of pump tube sets let you configure this pump to run at flow rates from 0.2 to 180 ml/hr, to work with a variety of solutions, and to pump in single or dual channel mode.
The Model Bi-0420131616 can operate as a stand-alone pump or as an element in closed loop control applications using the external speed control input. The pump has an internal battery that will operate the pump continuously for up to 30 hours if the power should fail or if you just want to move the pump around your lab without turning it off.
This pump's circuitry has been designed to minimize electromagnetic
radiation, making it ideal for use near sensitive microelectrodes. For
quietest operation, run the pump using the internal battery.
Rotor type 3 roller
Rotor speed .4 - 14 RPM
Size (WxHxD) 2.5" x 2.25" x 4"
Weight 1 lb.
Typical repeatability ±3%
Linearity vs. dial setting ±3%
Maximum pressure - .015"-.020" ID tube 20 PSI
Maximum pressure - .031"-.093" ID tube 5 PSI
The tube with a black ring on it has a slower fluid transfer rate than the other tube. The fresh media supply is coupled to this slow flow tube and the dish aspiration needle is attached to the faster flow tube. The level in the dish is controlled by adjusting the depth of the aspiration needle. This technique works well with all Delta T perfusable accessories.
For full web page, please see http://www.autom8.com/temp-perfusion-pump.html
Download a User's Manual at http://www.autom8.com/bioptech/delta_o/deltat4controller.pdf
Download a brochure at http://www.autom8.com/pdfs/temperature/Delta-T-Open-Dish-Heater-Accessories.pdf