Siskiyou Manual microscope translator, 14.563″x12.25″

Description

Our MXMS-100cr series microscope translators are designed to be stable XY translators for fixed stage experiments. MXMS-100cr series translators have a full 25 mm of XY translation and have full crossed roller bearing stages in all three locations.

Our MXMS crossed roller translators are available in motorized and manual versions. Manual versions can be fitted with either 20, 40, 80, or 100 TPI adjustment screws with resolution from 20 µm down to 5 µm, respectively.

MXMS-100cr series stages can be sized to fit most microscopes. Please include the manufacturer name and model of your microscope when ordering.

Note: Please specify which pitch of adjustment screw you require when ordering. Replace -xx in the Model Number with the desired thread.

Requires MXMS-xx screws and MXMS-K mounting kit – sold separately.

Specifications

• 20-, 40-, 80-, or 100-pitch drive screws (sold separately)

• Compatible with fixed stage microscopes

• Full crossed roller stage support

• Maximum load 200 lbs, centered Travel / axis 1.0 inch (25 mm)

• Minimum controllable motion:
MANUAL
20 TPI 10 µm
40 TPI 5 µm
80 TPI submicron
100 TPI submicron

Manufacturer: Siskiyou
Catalog number: SD-MXMS-115cr-xx
Parent Category: Manual & Motorized Microscope Translator
Application: Siskiyou Mechanicals

For full web page, please see https://www.autom8.com/siskiyou-mechanicals-overview/manual-motorized-microscope-translators

Download a brochure at https://www.autom8.com/wp-content/uploads/2016/07/Siskiyou-Translators.pdf