Bioptechs Objective Heater, Standard (16-28mm)

Description

The heater/sensor is comprised of an adjustable thin-film heating band which surrounds 3/4 of the diameter of the upper region of the central retracting tube of the objective. A surface probe thermal sensor positioned in the gap formed between the ends of the heating band measures the temperature of the objective. This heater/sensor assembly is supported on an adjustable metal mounting to fit objectives ranging from 17 to 35mm in diameter. The heater loop requires a minimum of 3.5 to 6mm longitudinal, physical contact with the cylindrical objective surface depending on which objective heater is required. In some cases there may be a decorative collar on the objective which must be removed in order to permit adequate surface contact.

Manufacturer: Bioptechs
Catalog number: Bi-150819
Parent Category: Objective Heat and Cool
Application: Temperature Control

For full web page, please see https://www.autom8.com/temperature-control-overview/objective-heater-system

Download a User's Manual at https://www.autom8.com/wp-content/uploads/2016/07/Objective-Cooling-Collar.pdf

Download a brochure at https://www.autom8.com/wp-content/uploads/2016/07/Objective-Heat-Cool.pdf